Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:    
  

View Cart |  CheckOut |  Order Status |  Help    

 
 
Shop by Make or Model:

 
Sign up for our newsletter, chock full of hints and tips about your car.  Click here for a sample.
 
Tech Articles
Photo Gallery
About Us
Info & Support
Newsletter
Home > Tools > Shop & Garage >  Suspension

Wheel Bearing Kit $140.00
Change a wheel bearing without changing your wheel alignment the easy way. This complete kit includes bearing caps and barrels for Toyota/Lexus, Nissan/Infinity, Honda/Acura, Other Asian... more...  

Universal Spring Compressor $28.92
Remove valve springs on most cars with overhead valves without removing the cylinder head. Offset jaws grip the valve spring in parallel compression. Tool maintains constant length as... more...  

Strut Spring Compressor
• Patented "floating" compression head design adjusts itself to correct angle • Increased capacity to handle larger struts • Double start ACME thread - twice as fast! • 3-point upper and... more...  

Spring Compressor Kit $34.95
This tool is used to compress the coil spring for MacPherson struts and is 300mm in length. ... more...  

6pc Wheel Stud Installer Kit $59.54
This kit assures correct installation of wheel studs the first time, every time. No more ruined studs or lug nuts, and no more wasted time. Easy instruction / diagram sheet included. ... more...  

Ford E250/350 Ball Joint Remover
When used with OTC7249 ball joint service tool set, lets you quickly remove the lower ball hoint on 1992 and newer 3/4- and 1-ton full-size vans (E-250 and E-350) Manufacturer: OTC DIVISION... more...  

Disc Brake Piston Tool $15.42
Designed to rotate the parking-brake-activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with 4-wheel disc brakes. Tool will function on most domestic... more...  

Wheel Weight Tool $32.69
Tool installs, removes, trims and tightens all types of clip-on wheel weights. It features a special plastic-type material on the hammer head for safe, mar-free installation of specially... more...  

Needle Nozzle For U-Joints $28.55
• Allows grease gun operator to contact flush type or hard to reach hydraulic type fittings, including u-joints • Extended version with locking sleeve Manufacturer: LINCOLN INDUSTRIAL (LUBE... more...  

Taurus/Sable CV Joint Fork $47.03
• Removes most C.V joints having hidden retaining rings without damage to transmission case, boot or bearing. Services most GM, Ford, and Chrysler vehicles. • Use with OTC 1155 slide hammer... more...  

CV Joint Banding Tool $13.38
Works on all CV joints using Band-Itฎ and Band-It Jr.ฎ type boot bands. Use 5/8" socket or wrench to wind and crimp new band on boot. Tool is easily disengaged from the band after the band... more...  

2pc Strut Clamp Bolt Removers
To remove MacPherson strut clamp bolts and other bolts, loosen the nut several turns. Place tool over nut and drive the bolt out with an air hammer. Two sizes included to fit most applications... more...  

Upper Arm Bushing Service Set $255.58
Includes all adapters needed for quick bushing removal/installation without removing control arm from vehicle. Now you can easily replace press-in type upper control arm bushings on most... more...  

Axle Stud Cone Pliers $40.43
Now you can easily remove the tapered cone from the studs used on medium- and heavy-duty truck rear axles. This specially designed plier gives you the leverage needed to expand the cone... more...  

Ball Joint Spanner Wrench $39.61
Designed for removal and installation of ball joint adjusting sleeves on 1/2-, 3/4-, and 1-ton Dana open yoke front axles found on Ford, GM, Chrysler, IHC and Jeep 4WD vehicles. Tool permits... more...  

Single Action Coil Spring Clamp $55.23
Remove, install and compress coil springs that can be reached through the center of the coil. Smooth bearing action and finest quality heat treated steel makes for safe, quick compression... more...  

Pro Super Hub-Shark FWD Hub/Bearing Remover/Installer Kit $620.26
A Terrific Time Saver! The Hub-Sharkฎ System lets you replace the front wheel bearing on front wheel drive vehicles without removing the steering knuckle from the vehicle. You can complete... more...  

King Pin Pusher W/Hydraulics $2525.25
Here's the answer! When servicing king pins, this unit is quickly mounted on the front axle...a unique "swinging gate" feature makes setup easy. Both straight and tapered king pins may... more...  

5pc Front End Tool Set $146.99
This kit includes five popular tools used for servicing Pitman arms, ball joints, and tie rods on most vehicles. • Two Pitman Arm Pullers for large or small ball joint applications. •... more...  

Hub Tamer Master Tool Set
• Cuts 50% off the normal service time to replace front wheel bearings! You do not need to remove knuckle assembly, or use shop press, or do a front-end alignment. • Most up-to-date and... more...  

Ball Joint Press Kit $134.51
This set removes and replaces ball joints. The C-frame press alone can also be used to remove and replace universal joints. Includes: C-frame press, receiver tube (3" O.D. x 2-3/4" I.D.... more...  

Strut Alignment Level $25.75
Use this level to restore a vehicle's camber setting after strut repair or installation. Allows technician or customer to safely drive the vehicle before a more precise wheel alignment can... more...  

Strut Tower Adapter Plate
Designed for a wide variety of strut towers. Permits fast hook-up and pulling in any direction. Allows center strut tower measurements with tram gauge instruments. Gives additional versatility... more...  

Strut Tool $53.47
• Removes GM10 Model MacPherson Strut Cartridge on the Car! Tool completely removes and installs strut cartridge through the strut tower. Comes with handle, spanner wrench and T-50 Torx... more...  

GM10 Strut Tool Set
• 2 piece set used to remove and replace the stut cartridge through the shock tower Manufacturer: BRANICK    Click here to visit the manufacturer's home page ... more...  

Strut-Tamer Spring Compressor
• Same features as the previous model OTC 6070 StrutTamer, but now features a 3-knob handle for easier operation. • Now comes standard with the OTC 6270 stut bridge accessory that accommodates... more...  

Strut-Tamer Compressor Stand
Stand only. Manufacturer: OTC DIVISION OF SPX CORP    Click here to visit the manufacturer's home page ... more...  

Clamshell Strut Spring Compressor $246.96
• Servicing MacPherson struts is convenient and affordable with this compressor. It fits a wide range of struts and requires no special adapter shoe. • Safety locking pins hold the compressor... more...  

Mcpherson Strut Spring Compressor $50.61
Every shop, no matter how small, can do work on the Mac Pherson Strut assembly found on virtually all modern domestic and imported vehicles. The S & G 62900 "Strutter" can be: • Used with... more...  

Economy Mac-Strut Spring Compressor
High quality at low cost! This is the best tool value, designed to do the job in every shop and garage. Features shafts of one piece forged construction with rolled threads. 1/2" square... more...  

5-in-1 Inner Tie Rod Tool $79.21
•Works on Tie Rods With Inaccessible Flats Many inner tie rod end sockets do not have a complete hex on the full length of the socket. The rounded socket ends prevent access to the wrench... more...  

Universal Tie Rod Adjusting Tool $36.74
Permits 360 degree rotation of sleeve for required adjustment. Four-position feature lets you locate tool to grip sleeve properly, even when access is limited. Universal - services most... more...  

Outer CV Joint Remover
• Removes C.V. joints from most front wheel drive vehicles having concealed internal circlip. • Use with slide hammer with a 5/8"-16 UNF thread (such as OTC 1155 or 1156) Manufacturer: OTC... more...  

Ball Joint Separator $23.48
Tool separates ball joints from steering knuckles. To use, insert 15/16" opening between parts and strike with hammer. Separator is forged to withstand hard usage. Overall length: 12... more...  

Outer CV Joint Remover
• Removes C.V. joints from most front wheel drive vehicles having concealed internal circlip. • Use with slide hammer with a 5/8"-16 UNF thread (such as OTC 1155 or 1156) Manufacturer: OTC... more...  

Ball Joint Separator $23.48
Tool separates ball joints from steering knuckles. To use, insert 15/16" opening between parts and strike with hammer. Separator is forged to withstand hard usage. Overall length: 12... more...  

5pc Tie Rod/Pitman Set $74.96
Consists of one Pitman arm and four tie rod tools in a blow-molded storage case. Manufacturer: OTC DIVISION OF SPX CORP    Click here to visit the manufacturer's home page... more...  

Pneumatic Tie Rod Separator
The specific opening between tines of 21/32" does the job quickly and properly. Manufacturer: OLDFORGE TOOLS    Click here to visit the manufacturer's home page ... more...  

Pneumatic Ball Joint Separator
The opening between tines is 15/16", which will handle ball joints with a minimum of shock to the assembly. Manufacturer: OLDFORGE TOOLS    Click here to visit the manufacturer... more...  

7.5" Pilot Bearing Puller
This puller will remove flywheel pilot bearings. It is also effective as a bearing and bushing puller for generators and starters. The capacity is 1/2" to 1-1/2" I.D. Manufacturer: OLDFORGE... more...  

Tie Rod End/Pitman Arm Remover $49.24
We've redesigned it for use on imports and many of today's front wheel drive cars. This easy-to-use adapter attaches directly to the studs - no more adapter to choose! To use, simply insert... more...  

Tie Rod Tool-Compact Cars
Unique design permits 360 degree rotation of the adjusting sleeve even where space is limited. 1/2in. square drive allows use of ratchet or breaker bar. Includes: 3/4in. diameter adjusting... more...  

Outer Tie Rod Remover $85.25
Works on imports and domestics; front or rear wheel drives; and cast or stamped steel steering knuckles. This one's a must when working on outer tie rods. Its versatility is a big time... more...  

Tie Rod Adjustment Tool-Full Size Car
Unique design permits 360 dUegree rotation of the adjusting sleeve, even where space is limited. 1/2in. square drive allows use of ratchet or breaker bar. Includes: 7/8in. diameter adjusting... more...  

Tie Rod End/Ball Joint Lifter $20.40
This labor saving tool quickly separates tie rod ends and ball joints from suspension components. Eliminates broken grease reservoirs. No need for excessive hammering. Powerful lever... more...  

Tie Rod Puller
A very rugged puller that will pull the tie rod ends with a straight fim pull. No hammering or prying required. The center pin desgin allows the jaws to grip the parts secruely, greatly... more...  

Chrysler-Toe Adjust Tool Set
• Enables technician to adjust toe, obtain a straight steering wheel, and correctly center the tie rod end. Permits easily reaching and breaking loose the tire rod jam nuts while the entire... more...  

Pickle Fork Kit $48.20
For separating ball joints, tie rods, pitman arms and other uses. Six tools in one for exceptional versatility and value. Kit consists of three forks and two handles; one for hammering,... more...  

B-Joint Adapter Kit Dodge/Ram/Jeep
Use with the No. 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints, and the offset ball joints used to change caster/camber. Applications... more...  

Honda Lower Ball Joint Adapter $124.59
• Used with OTC 7249 ball joint service set to remove/install both sizes of ball joints on 1983-1997 Honda Accord, Civic, del Sol and Prelude. • 4 piece set. Manufacturer: OTC DIVISION... more...  

Ball Joint Fork Separator
Ball joint service is easier than ever with this tool. It was designed solely to remove ball joints from spindle support arms without damaging other components, so you know it will do the... more...  

Torsion Bar Unloading Tool $180.80
GM's K-35 series trucks with the heavy-duty chassis require heavy-duty tools to deal wih the larger torsion bar. The larger C-frame opening on the 7822A accommodates the beefed-up torsion... more...  

Spicer Clutch Adjuster $42.62
• For Spicerฎ-built Heavy-Duty Clutches • This easy-to-use clutch adjusting wrench will solve the difficult, time-consuming job of internal adjustment of Spicer angle-spring and multiple... more...  

    
 
  Search our site:    

View Cart |  CheckOut |  Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Privacy Statement]
 [Contact Us] [About Us] [Shipping] [Affiliate Program] [Links]

Copyright ฉ 2005, DriveWerks & Pelican Parts Inc.